ECM connector?
Safety Car
Joined: Oct 2007
Posts: 3,816
Likes: 0
From: :45 minutes from everywhere / E-I-E-I-O
Yours might have numbering 1 - 12 (or 16) on the connector for diagnostics - it's hard to read.
UNLESS, you're talking about the ALDL-ECM connector...?
Thread Starter
Drifting
Joined: Jan 2003
Posts: 1,894
Likes: 3
From: Reading PA.
This is on my 88 not the 90 The guy who I bought the car from was going to do a pinout to change to a later style ECM and lost the old connector. I want to put the 88 ECM connector back on till I get it running. Pipe
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Feb 2006
Posts: 2,753
Likes: 15
From: backwoods upstate ny
j-y finding
late 80's s-10/s-15 pick-ups with 4-cyl engines use the -165 ecm and are ez to pull out...look under dash far right (pass) side, if no hush panel (most) just one 7mm head screw and the ecm drops down
Melting Slicks
Joined: Jul 2003
Posts: 2,384
Likes: 124
From: Reno/Sparks Nevada
I think other GM cars used the same two connector and not necessarily connected to a 1227165 ECM. As long as the connectors have the same number of pinouts, it should work. Obviously the color code for some of the wiring will be different but with the proper tool to remove the pins from the connector, there shouldn't be too much problem either re-arranging them or installing his old wiring harness pins into the new used connectors.
Art
Art
- 1986 Original Owner -
Joined: Apr 1999
Posts: 3,193
Likes: 139
From: North Yorkshire, England
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In VII Veteran
The Dash Cluster in the '84-'89 uses the same connectors. I have some if needed. PM me.
Le Mans Master
Joined: Aug 2003
Posts: 9,884
Likes: 3
From: Magnolia Mississippi
St. Jude '03-'04-'05-'06-'07
