cam selection article for a 765hp blown 355
Thread Starter
Team Owner
Joined: Mar 2001
Posts: 30,858
Likes: 293
From: Boston, Dallas, Detroit, SoCal, back to Boston MA
cam selection article for a 765hp blown 355
reposted for here for those who dont' venture into the FI section
Engine Master's article posted on AFR's site
http://airflowresearch.com/articles/article122/A-P1.htm
following the link for the rest of the pages.
also an 810hp 383 with smaller 195 heads
http://airflowresearch.com/articles/article119/A-P1.htm
Thread in the FI section
http://forums.corvetteforum.com/show....php?t=2076118
tequilaboy made some real
plots
Engine Master's article posted on AFR's site
http://airflowresearch.com/articles/article122/A-P1.htm
following the link for the rest of the pages.
also an 810hp 383 with smaller 195 heads
http://airflowresearch.com/articles/article119/A-P1.htm
Thread in the FI section
http://forums.corvetteforum.com/show....php?t=2076118
tequilaboy made some real
plots
Last edited by BrianCunningham; Jul 12, 2008 at 03:58 PM.
