Link for Craig Moates' software
Thread Starter
Race Director
Joined: Jul 2000
Posts: 15,921
Likes: 0
From: College of Charleston, SC
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Link for Craig Moates' software
Wondering what the link was for Craig Moates' software. Thinking of using this software with an Datarase II EPROM Eraser with timer, tuner cat, an AKM cable, and an EMP-10 Programmer for my '91. Anything else that I need?
Melting Slicks
Joined: Aug 2001
Posts: 2,516
Likes: 0
From: Lockport NY
Re: Link for Craig Moates' software (vettes rule)
This link was still active 10 seconds ago -
http://ice.prohosting.com/moates/gmecm/index.htm
Craig was on Tripod, but they decided he was distributing copyrighted software, so the peckerheads booted him...
You'll need a laptop that runs anything with DOS mode on it (no WinME). I use an old 486; some people with faster CPUs have reported problems. Of course, there are always exceptions...
[Modified by Rich B., 11:55 AM 12/28/2001]
http://ice.prohosting.com/moates/gmecm/index.htm
Craig was on Tripod, but they decided he was distributing copyrighted software, so the peckerheads booted him...
You'll need a laptop that runs anything with DOS mode on it (no WinME). I use an old 486; some people with faster CPUs have reported problems. Of course, there are always exceptions...
[Modified by Rich B., 11:55 AM 12/28/2001]
Thread Starter
Race Director
Joined: Jul 2000
Posts: 15,921
Likes: 0
From: College of Charleston, SC
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Re: Link for Craig Moates' software (Rich B.)
Rich, it worked for me. If you need it and it still doesn't work, I can e-mail it to you. :D
Thanks for posting the link!
Thanks for posting the link!
Melting Slicks
Joined: Aug 2001
Posts: 2,516
Likes: 0
From: Lockport NY
Re: Link for Craig Moates' software (vettes rule)
Thanks, I still have the last change from when we was all Beta testing it! :D
BTW: Craig is looking for people interested in a memCal adapter. He's still trying to get an idea of what everyone is looking for in an adapter, go over and make your wants known!
http://www.thirdgen.org/techbb2/show...threadid=73507
BTW: Craig is looking for people interested in a memCal adapter. He's still trying to get an idea of what everyone is looking for in an adapter, go over and make your wants known!
http://www.thirdgen.org/techbb2/show...threadid=73507
Melting Slicks
Joined: Aug 2001
Posts: 2,516
Likes: 0
From: Lockport NY
Re: Link for Craig Moates' software (Wildride)
Sorry; I should have stated that there is more than one version of Craigs software. I use "E6", and run it in DOS. There have been reports that it has problems running in Windows.
I've used 845 for testing; but I prefer E6. I'm old fashioned! :D
I've used 845 for testing; but I prefer E6. I'm old fashioned! :D
