throttle body
Thread Starter
Intermediate
Joined: Nov 2007
Posts: 42
Likes: 0
From: jacksonville florida
throttle body
looking at doing a few first mods to my 94lt1 auto, just wanted a little feedback to see what sort of power gains i might see
I am looking at installing a bbk 52mm throttle body, a ported intake, and adj. fuel pressure regulator
also will a intake from a camaro work on a corvette both are from 94 lt's
I am looking at installing a bbk 52mm throttle body, a ported intake, and adj. fuel pressure regulator
also will a intake from a camaro work on a corvette both are from 94 lt's
Pro
Joined: Jan 2004
Posts: 707
Likes: 0
From: Syracuse Utah
Throttle body mods won't help much until you complete other mods first, like cam, exhaust, and intake. Once you do those, a 52mm is about right but still, don't expect a lot from the throttle body. Ported intake will help much more. I can't say for sure on the camaro intake, but I'd think any lt1 to lt1 or lt4 to lt4 intake would be interchangable except one from the smaller 265 engine. An lt1 intake will not interchange with an lt4 intake.
Drifting
Joined: Jun 2004
Posts: 1,477
Likes: 87
I've read a thread asking about the compatability here before, and there were some opinions that some fittings were moved around, but I'm not sure if was between different LT1 years, or it was diffs between the f-body and y-body.
Le Mans Master
Joined: Jun 2006
Posts: 5,642
Likes: 5
From: One day you're a Comet...the next day you're dust... Arkansas
looking at doing a few first mods to my 94lt1 auto, just wanted a little feedback to see what sort of power gains i might see
I am looking at installing a bbk 52mm throttle body, a ported intake, and adj. fuel pressure regulator
also will a intake from a camaro work on a corvette both are from 94 lt's
I am looking at installing a bbk 52mm throttle body, a ported intake, and adj. fuel pressure regulator
also will a intake from a camaro work on a corvette both are from 94 lt's
TB = 0
AFPR = 0
Ported intake = very little
Save some more money and put a LT4 Hotcam kit in it.
Safety Car
Joined: Jul 2008
Posts: 3,966
Likes: 4
From: Made In America
St. Jude Donor '10-'11
Agreed with this gentleman. LT4 hotcam, 1:6 roller rockers, heads, custom chip burned, and then the 52 mm throttlebody will help.
Melting Slicks
Joined: Feb 2008
Posts: 3,286
Likes: 6
From: Palm Beach
