Back up switch
Melting Slicks
Joined: Mar 2006
Posts: 2,455
Likes: 6
From: MichAgain
I don't remember the size (get your new switch and check it against that) somewhere around 1" to 1-1/8" or metric equivalent, DEEP offset box-end wrench. I couldn't use a socket, but don't remember why.
This was on my 91 with a ZF 6 spd.
Do you have access to a lift? It helps. There's not a lot do doing it but it's a PITA because of access clearance.
Good Luck!
This was on my 91 with a ZF 6 spd.
Do you have access to a lift? It helps. There's not a lot do doing it but it's a PITA because of access clearance.
Good Luck!
Melting Slicks
Joined: Mar 2006
Posts: 2,455
Likes: 6
From: MichAgain
