Remove the late L98 "Frisbee"
Thread Starter
Race Director
Joined: Feb 2001
Posts: 13,913
Likes: 101
From: Manassas VA
NoVa Events Coordinator
St. Jude Donor '14
Remove the late L98 "Frisbee"
IN the tech section they talk about removing a 10 pound disk from the water pump pulley to achieve 10 more hp. What does the disk look like. We where looking at my fathers 88 L98 and can't seem to find the disk. It might have been removed by another owner or I am blind.
Robert http://www.corvetteforum.cc/techtips...D=96&TopicID=1
[Modified by Bluewasp, 11:03 AM 1/27/2002]
Robert http://www.corvetteforum.cc/techtips...D=96&TopicID=1
[Modified by Bluewasp, 11:03 AM 1/27/2002]
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
Re: Remove the late L98 "Frisbee" (Bluewasp)
On an '88 it's a flat black disk about 1' in diameter and maybe 3/8" thick located on the front of the water pump pulley.
Check my site for a pic and my method of converting to no "frisbee".
[Modified by 65Z01, 12:55 PM 1/27/2002]
Check my site for a pic and my method of converting to no "frisbee".
[Modified by 65Z01, 12:55 PM 1/27/2002]
Thread Starter
Race Director
Joined: Feb 2001
Posts: 13,913
Likes: 101
From: Manassas VA
NoVa Events Coordinator
St. Jude Donor '14
Re: Remove the late L98 "Frisbee" (65Z01)
Thanks... I just check out the picture and that frisbee/disk is NOT on his car.... I guess a pervious owner removed it or someone's dog came by and stole it!! :D bad joke.. ahahah
thanks again for the help!!
[Modified by Bluewasp, 9:40 PM 1/27/2002]
thanks again for the help!!
[Modified by Bluewasp, 9:40 PM 1/27/2002]
