383 stroker kit
Thread Starter
Drifting
Joined: Oct 2001
Posts: 1,351
Likes: 20
From: Back in San Diego Ca
383 stroker kit
Thinking about getting a stroker kit, good idea or bad idea. There is one in Summit for $1,099.95. What would I have to do to my 350 to support this? Or does someone know of a better kit. How is the one that PAW makes?
[Modified by OrangeC4, 9:22 AM 1/29/2002]
[Modified by OrangeC4, 9:22 AM 1/29/2002]
Drifting
Joined: Jan 2002
Posts: 1,663
Likes: 139
From: Vail AZ
Re: 383 stroker kit (OrangeC4)
I built one of these once upon a time. I had no clearance issues, but you'll need to check for clearance with the crank throws to block casting and possibly do a minimal amount of relief grinding. Some blocks apparently will need this, but I got lucky. Good luck to you, tom
Safety Car
Joined: Dec 1999
Posts: 4,691
Likes: 1
From: Framingham MA
Re: 383 stroker kit (OrangeC4)
I would personally go with one of Scat cranks kit, you can get better pistons rod for less money.
http://www.flatlanderracing.com/stroker350383ca.html
http://www.flatlanderracing.com/stroker350383ca.html
