Accel LTR's and Stock Ported Plenum
Le Mans Master
Joined: Jul 2007
Posts: 5,043
Likes: 8
From: Tampa Florida
You should just need a "larger" Hi-Flow set. These should work: http://store.summitracing.com/partde...6&autoview=sku
Some minor gasket trimming may be required depending on how "ported" your plenum is.
Some minor gasket trimming may be required depending on how "ported" your plenum is.
Race Director
Joined: Nov 2003
Posts: 12,221
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
There are two other sources where the gaskets sell for less:
http://www.tpis.com/index.php?module...LT1%29+Gaskets
-- also these should work --
http://www.tpiparts.net/inc/sdetail/3221
With any set, you might want to trim the inside edges of the ports until they match the tube size.
http://www.tpis.com/index.php?module...LT1%29+Gaskets
-- also these should work --
http://www.tpiparts.net/inc/sdetail/3221
With any set, you might want to trim the inside edges of the ports until they match the tube size.
