Need some help with future mods
Thread Starter
Le Mans Master
Joined: Feb 2001
Posts: 6,398
Likes: 1
From: Loveland Co
Cruise-In III Veteran
Need some help with future mods
Okay well the car made HP= 235 TQ= 341,
now all that has really been done is the forced air intake, which had very little if any air being pushed into it. The 1.6 Pro Mag roller rockers, muffler eliminators. Thats pretty much it except for the MSD. I am working on cutting back the walls on a spare intake, hopefully push that peak up past 5,000 rpms closer to 5,500 rpms. I have an AFPR to add.
So now to the question, what can i do to make more HP, i am pulling the manifolds off to grind out all the excess welding in the port, and plan on taking the pre-cats off or gutting them and putting on a high flow cat. Anything else? comments and suggestions are greatly appreciated. Thanks guys :cheers:
now all that has really been done is the forced air intake, which had very little if any air being pushed into it. The 1.6 Pro Mag roller rockers, muffler eliminators. Thats pretty much it except for the MSD. I am working on cutting back the walls on a spare intake, hopefully push that peak up past 5,000 rpms closer to 5,500 rpms. I have an AFPR to add.
So now to the question, what can i do to make more HP, i am pulling the manifolds off to grind out all the excess welding in the port, and plan on taking the pre-cats off or gutting them and putting on a high flow cat. Anything else? comments and suggestions are greatly appreciated. Thanks guys :cheers:
Thread Starter
Le Mans Master
Joined: Feb 2001
Posts: 6,398
Likes: 1
From: Loveland Co
Cruise-In III Veteran
Re: Need some help with future mods (Glock'94)
cam :yesnod: :yesnod:
Drifting
Joined: Mar 2001
Posts: 1,578
Likes: 0
From: Antioch IL
Re: Need some help with future mods (vader86)
hotcam or headers
Thread Starter
Le Mans Master
Joined: Feb 2001
Posts: 6,398
Likes: 1
From: Loveland Co
Cruise-In III Veteran
Re: Need some help with future mods (art91)
hotcam or headers
The hotcam is not designed the for L98's power band. Real power comes from the whole package: intake, heads/cam, exhaust. How much power are you looking for?
The hotcam is not designed the for L98's power band. Real power comes from the whole package: intake, heads/cam, exhaust. How much power are you looking for?
My current plans are to to the intake mod that involves cutting the dividing walls out of the manifold
Then to do the AFPR
Then remove the pre-cats
Then maybe do cam and TB
Anyone with similar set ups, or maybe even a guess as to what i might have with those mods?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
