Swaybar measurement.....?
Thread Starter
Le Mans Master
Joined: Jun 2009
Posts: 5,060
Likes: 1
From: Tabernacle NJ
St. Jude Donor '10-'11-'12-'13
Swaybar measurement.....?
Ordering swaybar bushings for 93 vert lt1.Kits listed for 4 sizes 22,24,26,30mm.Do I measure the bar or bushing.Also bushings are old and their measurements vary.Looks like either 24 or 26 mm,measurements leave me in the middle between the two.Any concrete specs for this application ...thanks
Thread Starter
Le Mans Master
Joined: Jun 2009
Posts: 5,060
Likes: 1
From: Tabernacle NJ
St. Jude Donor '10-'11-'12-'13
Measured the bar with caliper and converted over and get diffrent od's as well as measuring the actual bushing which varies in size due to shrinkage or bulging.Where to measure the bar and then use id or od to figuere size is the question.
Drifting
Joined: Nov 2005
Posts: 1,324
Likes: 5
From: Charlotte NC
If I recall, I had the same experience and just took it to the nearest OD available and bought those. They did fit perfectly.
