FPR for carb setup
Instructor
Joined: Sep 2005
Posts: 184
Likes: 0
Fpr
In the Summit book it is part #MMA 4307 Mallory. It is a 3 port with return line on bottom.adjust your FP to 4-6 lbs. I run mine at 5 lbs for everyday driving 1 to 2 lbs of fuel pressure in very noticeable in power & MPG.I have had the mallory FPR for about 4yrs. It's about half the size of an aeromotive works great. Tie your FPR & return line down tight with 50 lbs of FP going back to return line it will jump a bit.
Le Mans Master
Joined: Aug 2000
Posts: 8,838
Likes: 31
From: Australia
More expensive but very compact.
http://www.summitracing.com/parts/AEI-13301/
Has springs for both carb and injection so should you ever wish to run a aftermarket injection setup , no need to buy new reg
http://www.summitracing.com/parts/AEI-13301/
Has springs for both carb and injection so should you ever wish to run a aftermarket injection setup , no need to buy new reg
