When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I, for one, will only believe it when I see it. Furthermore I have lost interest in getting one but I also have not found anything else I am interested in. Finding this prompted me to look at Summit, it isn't even listed there.
okay, i see two charts with two curves each - a red and blue. other than that, it doesn't tell me a whole lot. i'm assuming the blue curve is stock, and the red is with the intake assembly. you'll notice stock performs better to about 4000RPM. now on the street, that's where we do most of our driving. i'm sure there may be some benefit on the strip, but without other mods - well, i just don't get it. so, just what are we looking at - ???. i also doubt some of the claims - maybe 50HP with other mods - seeing anything with stock components, well i doubt if you'll see much, if anything. the runners may have a shorter length, and overall, the setup may flow slightly better, and you may pick up some extra HP, but by the SOTP, you'll never feel it. kinda of pricey, and unless you're doing other mods - not much bang for the buck IMHO.
Well, I guess a small part of me would like to see this intake available even though BBK has teased us with it way too long. I emailed them to see if Jeg's truly did have it in stock, they replied that the intake is not even ready to go into production. It is strictly my belief that they are having doubts about whether it will sell with all the bad feedback it has gotten. They have no one to blame but themselves. I don't remember what the name of their rep was that was on here touting the manifold but he was definitely full of crap. As far as I'm concerned they would have to give me one free of charge, that's the only way one will be put on my engine now.
Of course it will make 50hp more where the TPI drops off, makes sense. Shorten the runner length like using a superram, miniram LT1 intake it will happen. Nature ofthe beast
Like to see someone step up to the plate and get one, bet it performs nice. $800 seems reasonable for what youre getting.
There is no magical intake that gives perfect bottom end and top end its always a trade off.
Of course it will make 50hp more where the TPI drops off, makes sense. Shorten the runner length like using a superram, miniram LT1 intake it will happen. Nature ofthe beast
Like to see someone step up to the plate and get one, bet it performs nice. $800 seems reasonable for what youre getting.
There is no magical intake that gives perfect bottom end and top end its always a trade off.
I waited for a year for this thing. I did the HSR mod when I called and they had no answer for me.
Of course it will make 50hp more where the TPI drops off, makes sense. Shorten the runner length like using a superram, miniram LT1 intake it will happen. Nature ofthe beast
Like to see someone step up to the plate and get one, bet it performs nice. $800 seems reasonable for what youre getting.
There is no magical intake that gives perfect bottom end and top end its always a trade off.
Everything you say is true,,100%. I would have stepped up and bought one but enough is enough and I sincerely doubt it will ever exist.