Steering wheels
Thread Starter
Pro
Joined: Sep 2004
Posts: 505
Likes: 1
From: Guntersville Alabama
Steering wheels
I know this has been done before, but the options and pics that came of it before were very limited and in my opinion not very sporty. Here it goes. What is a cool replacement for the otherwise ugly C4 steering wheels...and d**n the airbag. I've got a 93.
Thanks for any and all replies.
93cruiser
Thanks for any and all replies.
93cruiser
Team Owner
Joined: Sep 2003
Posts: 20,170
Likes: 672
From: Freedom is never more than one generation away from extinction.
St. Jude '03 thru '24
Although the stock well is not very aesthetic by todays standards,
It does offer an unobstructed view of the instruments.
I too would like another design that stays inside the Corvette boundaries,
and not into the ricer designs........
It does offer an unobstructed view of the instruments.
I too would like another design that stays inside the Corvette boundaries,
and not into the ricer designs........
Pro
Joined: Oct 2008
Posts: 704
Likes: 264
From: Jyväskylä, FINLAND
I had the same problem with my '91 and because there were no after market wheels available here in Finland, I decided to modify the original.
This is where I started:
This is where it ended:
The whole story: http://forums.corvetteforum.com/c4-g...r-project.html
This is where I started:
This is where it ended:
The whole story: http://forums.corvetteforum.com/c4-g...r-project.html
Thread Starter
Pro
Joined: Sep 2004
Posts: 505
Likes: 1
From: Guntersville Alabama
Nice work. Had not thought of modifing a steering wheel. I think this might be a doable project. If I come up with a design I will share. The draw back of course if you get radical you have to do away with the airbag. I can or not live with that. depends on the luck of the draw...uh.
93cruiser
93cruiser
