Mat relocator kit
Thread Starter
Advanced
Joined: Jul 2000
Posts: 98
Likes: 0
From: Saegertown Pa.
Mat relocator kit
What is a good kit to buy? Will the kit come with a new sensor? I would like to just leave the old one in place. I've looked at a couple, but $45-$50 seems a little steep for a wire harness and a grommet.
Burning Brakes
Joined: May 2001
Posts: 873
Likes: 0
From: Dallas Texas tx
Re: Mat relocator kit (TimV)
All the kits out there seem to not come with a fucntional sensor. My kit is $34 .99 compared to your being $44.99. YOu will also need to verify you fitting. There were two different ones for your year.
I wonder if it is even worth it.
Has anyone dyno'd or proved that this thing works!!! I am thinking about getting one if the proof is there.
I wonder if it is even worth it.
Has anyone dyno'd or proved that this thing works!!! I am thinking about getting one if the proof is there.
Le Mans Master
Joined: Jul 2001
Posts: 8,183
Likes: 3
From: Santa Maria, CA
Re: Mat relocator kit (TimV)
I am also concerned about it richening up the mixture. Where did I see info on this? If ya do the throttle body bypass, ya probably don't need the re-location kit.
Team Owner
Joined: Aug 2000
Posts: 42,935
Likes: 20
From: Sydney, Australia
CI 6-7-8-9-10 Veteran
St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16-‘17, '22
Re: Mat relocator kit (KYVette90)
I've got both no problems.
I really wouldn't worry about over-richening the mixture. IMO, the MAT sensor in the standard location basically allows it to become a heat sink so rather than reading the temperature of the air around it it is reading the temperature it has reached through heat soak from the motor and the components around it.
I'm sure installing an adjustable fuel pressure regulator and not setting it correctly would do more to cause a rich mixture (under WOT at least) than this mod.
