Wiring harness ?
Thread Starter
Pro
Joined: Oct 2009
Posts: 679
Likes: 0
From: vero beach florida
Wiring harness ?
I nicked 3 wires on a wiring harness on the backside of the engine.
I cannot get to the wires individually to wrap them in electrical tape.
Can I use something else to seal them, like gasket sealant or ?
None are cut all the way through and it is the harnees that loops over the bellhousing.
I cannot get to the wires individually to wrap them in electrical tape.
Can I use something else to seal them, like gasket sealant or ?
None are cut all the way through and it is the harnees that loops over the bellhousing.
Le Mans Master
Joined: Jul 2007
Posts: 5,043
Likes: 8
From: Tampa Florida
Wipe the wires down with alcohol in the damaged area then apply several coats of some electrical "liquid tape" to build up the non insulated area. Try to install a minimum of 1 wrap of electrcial tape ("flag" it if you have to) on each idividual wire then get a small section of loom and slip it over the group of exposed wires you repaired to further protect them.
