How to pull Backup light switch

Reply Subscribe

Thread Tools

Search this Thread

Mar 13, 2002 | 08:58 AM

L-98Vette91

Thread Starter

Cruising

Joined: Jan 2002

Posts: 12

Likes: 0

From: Cleveland Ohio

How to pull Backup light switch

I have done a search on the topic. I have pulled the connector on the switch and jumped it. Lights work when I do that, so I atleast know it is the switch. Now....how the hell do I get the switch out??? It's a '91. Do I need a special tool or do I just try and wrench it off with a pair of pliers???

Thanks for your help :cheers:

Nate Dogg

Mar 13, 2002 | 12:55 PM

scorp508

Team Owner

Joined: Mar 2000

Posts: 83,383

Likes: 87

From: Boston, MA

I assume this is a 6-speed? :) I got the one off of my tranny using a set of pliers in there. There are other methods, but this worked for me. :)

Mar 13, 2002 | 02:00 PM

jfb

Team Owner

Joined: Mar 2001

Posts: 54,124

Likes: 30

From: Cincinnati, Oh USA

Re: How to pull Backup light switch (L-98Vette91)

If there is the same clearance as my 4+3, I had to machine a 7/8 socket for .015 clearance from hex peak to OD to remove the switch.

Mar 13, 2002 | 02:59 PM

85vetteguy

Drifting

Joined: Jun 2001

Posts: 1,490

Likes: 17

From: Darlington, MD

Re: How to pull Backup light switch (L-98Vette91)

Check current(april) issue of Corvette Fever, They have a good article w/pics. Good Luck, Guy

Mar 14, 2002 | 09:43 AM

L-98Vette91

Thread Starter

Cruising

Joined: Jan 2002

Posts: 12

Likes: 0

From: Cleveland Ohio

Re: How to pull Backup light switch (85vetteguy)

Thanks...I will try to get my hands on that issue and see what it has to say.

Reply Subscribe