Please Help Code ?
Thread Starter
Racer
Joined: Sep 2001
Posts: 314
Likes: 0
From: Forest Hill MD
Please Help Code ?
How do I see if I have an active fault code in my 1994 LTI Coupe ?
I just took out the MAF screen I took it apart and carefully set aside while I removed the screen and carefully put it back together, reinstalled it now it won't start.
Jim
:flag
I just took out the MAF screen I took it apart and carefully set aside while I removed the screen and carefully put it back together, reinstalled it now it won't start.
Jim
:flag
Drifting
Joined: Mar 2000
Posts: 1,630
Likes: 1
From: Woodstock GA
Re: Please Help Code ? (jims_red_94LT1)
Use a paper clip and jump the 4 to 12 terminals of the ALDL connector(that's the 4th from the left on top and the one right under it) and turn the key on with out starting and watch the speedo and write down the codes 1.1 is CCM, 4.1 are PCM 9.1 ABS/ASR and let us know what you find.
David Fulcher
David Fulcher
Racer
Joined: Jul 2001
Posts: 346
Likes: 0
From: southwestern Michigan USA
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
2027 Corvette vs The World: Every Model vs Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
Drifting
Joined: Mar 2000
Posts: 1,630
Likes: 1
From: Woodstock GA
Re: Please Help Code ? (jims_red_94LT1)
If what you had was H32
4.1
Then it's an EGR code and not the cause of the no start you need to take a look at the coil wire there is a chance that during the removal you may have hit it and if it was on it's way out killed it. Do you know if you are getting any spark? justa pull a spark plug wire and lay it down near the spark plug just far enough away that is it has spark you would be able to hear it jump to the plug, check it out and let us know.
David Fulcher
4.1
Then it's an EGR code and not the cause of the no start you need to take a look at the coil wire there is a chance that during the removal you may have hit it and if it was on it's way out killed it. Do you know if you are getting any spark? justa pull a spark plug wire and lay it down near the spark plug just far enough away that is it has spark you would be able to hear it jump to the plug, check it out and let us know.
David Fulcher