Another Camber-brace GP???
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Another Camber-brace GP???
I've had two members email me this week asking about another GP on the Camber-brace. I replied that we normally like to get 5-6 units for a GP, but I'd see what I could do to help them out.
So here we go, if there might be 3 or 4 others that would be interested, we'll do the $157.50 deal again with free freight. When you contact me, you'll have to mention this thread to get the deal, so I can be fair with the Forum. Send me an email or call to get on the list. Once it's a go, I'll get it set up in the Mall to make it easy to order.
Any questions, just ask.
Thanks,
Dave Cooper
R-D Racing Enterprises, Inc.
573-756-6954
dcooper@r-dracing.com
So here we go, if there might be 3 or 4 others that would be interested, we'll do the $157.50 deal again with free freight. When you contact me, you'll have to mention this thread to get the deal, so I can be fair with the Forum. Send me an email or call to get on the list. Once it's a go, I'll get it set up in the Mall to make it easy to order.
Any questions, just ask.
Thanks,
Dave Cooper
R-D Racing Enterprises, Inc.
573-756-6954
dcooper@r-dracing.com
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Re: Another Camber-brace GP??? (knp)
The GP is a GO!
I am working on getting it set-up in the Mall or you can contact me to place your order. Just be sure to mention this thread for the GP pricing.
I will be in and out of the shop today, so if you miss me, leave a number and I'll call you back.
Thanks,
Dave Cooper
R-D Racing Enterprises, Inc.
Phn/fax - 573-756-6954
I am working on getting it set-up in the Mall or you can contact me to place your order. Just be sure to mention this thread for the GP pricing.
I will be in and out of the shop today, so if you miss me, leave a number and I'll call you back.
Thanks,
Dave Cooper
R-D Racing Enterprises, Inc.
Phn/fax - 573-756-6954
Melting Slicks
Joined: May 2001
Posts: 2,143
Likes: 7
From: San Diego CA
Re: Another Camber-brace GP??? (84c4)
I've asked this before, but the brace was too new to know. Have you heard of anyone installing the brace with an electric water pump on an LT1 (or LT4)?
or
Does the brace cover any part of the front of the waterpump on an LT1? (If, so then it's not likely to work).
Thanks,
or
Does the brace cover any part of the front of the waterpump on an LT1? (If, so then it's not likely to work).
Thanks,
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Re: Another Camber-brace GP??? (John Row)
John,
We are working on a brace for you guys with the electric water pumps. I hope to have a unit installed by the first of the month. I'll post it on this Forum as soon as it's available.
Thanks,
Dave
We are working on a brace for you guys with the electric water pumps. I hope to have a unit installed by the first of the month. I'll post it on this Forum as soon as it's available.
Thanks,
Dave
Team Owner
Joined: Feb 2000
Posts: 51,504
Likes: 6
From: Sacramento CA
Re: Another Camber-brace GP??? (John Row)
Oh, what the hell... the ZR-1 can wait another month.
I'll contact you when I find my credit card.. I hid it from myself to prevent this sort of thing :D
I'll contact you when I find my credit card.. I hid it from myself to prevent this sort of thing :D
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Jan 2000
Posts: 3,418
Likes: 1
From: NW Chicago Suburbs
Re: Another Camber-brace GP??? (84c4)
We are working on a brace for you guys with the electric water pumps. I hope to have a unit installed by the first of the month. I'll post it on this Forum as soon as it's available.
Eric
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Re: Another Camber-brace GP??? (John Row)
Can you hold the GP open till it's available????? :D :D :D
If not, I'll probably get one anyway :cheers:
If not, I'll probably get one anyway :cheers:
I will have a deal on it when it is complete. I am working on keeping it priced the same as the others, but I am not sure where it will end up. It might be that the customer has to remove a few items that you don't normally have to with the standard brace to install it. But, I'm thinking that will be okay if it keeps the cost lower. Which is one of my priority's.
I'll keep you guys posted.
Thanks,
Dave
[Modified by 84c4, 6:40 PM 3/15/2002]
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Re: Another Camber-brace GP??? (Kale)
just let me know when you have the online credit card stuff ready so i can order.
thanks
thanks
You can order it here and I'll change the pricing before your card is billed.
http://store.yahoo.com/corvetteforum/caminspecall.html
Thanks,
Dave
Melting Slicks
Joined: Jan 2000
Posts: 3,418
Likes: 1
From: NW Chicago Suburbs
Re: Another Camber-brace GP??? (84c4)
...It might be that the customer has to remove a few items that you don't normally have to with the standard brace to install it. But, I'm thinking that will be okay if it keeps the cost lower.
Thanks for making parts for my Vette,
Eric
