Door Panel Fix...L Bracket
Thread Starter
Pro
Joined: May 2003
Posts: 503
Likes: 16
From: Virginia Beach VA
Door Panel Fix...L Bracket
...for those you did the door panel fix using the L bracket, where did you get your brackets?? I've been to Lowes, Home Depot, Northern Tools, Ace and True Value. Most have a L bracket (one inch) but the hole is too small. From reading the forum posts and looking at the pic from the Corvette Fever article, it looks like you need a bracket that will take a 10mm bolt or screw. help!
Thread Starter
Pro
Joined: May 2003
Posts: 503
Likes: 16
From: Virginia Beach VA
...yup...that might be what I end up doing. The brackets I did find were one inch high X 1/2 inch wide. Everthing I've read not to exceed one inch. Does that sound right.
I wonder (don't laugh) if it's possible to use JB Weld on the bracket to the door? Just a thought!
Leave it to me to make a 'simple' process a major event.
I wonder (don't laugh) if it's possible to use JB Weld on the bracket to the door? Just a thought!
Leave it to me to make a 'simple' process a major event.
Drifting
Joined: Nov 2009
Posts: 1,884
Likes: 0
...yup...that might be what I end up doing. The brackets I did find were one inch high X 1/2 inch wide. Everthing I've read not to exceed one inch. Does that sound right.
I wonder (don't laugh) if it's possible to use JB Weld on the bracket to the door? Just a thought!
Leave it to me to make a 'simple' process a major event.
I wonder (don't laugh) if it's possible to use JB Weld on the bracket to the door? Just a thought!
Leave it to me to make a 'simple' process a major event.
