Intake gaskets differences???
Thread Starter
Team Owner
Joined: Dec 2007
Posts: 20,974
Likes: 261
Intake gaskets differences???
I am installing this miniram, and now I see my 1204 Felpro gaskets, have all ports open, but the ones I removed here in the pic, have only a drilled hole through the back port.
Any help please. Are my new ones going to be ok, with the open passage?
These just came off the car, and only have a small hole, the felpros are completely opn on the back passage.
Any help please. Are my new ones going to be ok, with the open passage?
These just came off the car, and only have a small hole, the felpros are completely opn on the back passage.
Le Mans Master
Joined: Jul 2007
Posts: 5,043
Likes: 8
From: Tampa Florida
I don't think the mini ram intake has a back cross over coolant passage built into it so you should be good. Take a look at the intake and you'll know for sure. You'll need to block off/eliminate the coolant's heater hose riser tube that is "T'ed" into the heater hose for the L98 application though.
Thread Starter
Team Owner
Joined: Dec 2007
Posts: 20,974
Likes: 261
I don't think the mini ram intake has a back cross over coolant passage built into it so you should be good. Take a look at the intake and you'll know for sure. You'll need to block off/eliminate the coolant's heater hose riser tube that is "T'ed" into the heater hose for the L98 application though.
Thanks
