[Paging Craig Marcho] Chip making?
Thread Starter
Le Mans Master
Joined: Mar 2001
Posts: 9,464
Likes: 1
From: Modesto CA
[Paging Craig Marcho] Chip making?
Can you make me a chip, that's a mirror image of my factory chip...except that it turns on the main fan at 200º and off at 160º? Or would you have to change SOME other things around too? Because I'm REALLY happy with my current factory chip, I just would like the main fan to come on sooner.
Safety Car
Joined: Dec 1999
Posts: 4,691
Likes: 1
From: Framingham MA
Re: [Paging Craig Marcho] Chip making? (TIMSPEED)
I sent you email, but I am not so sure want it to come on 200 and goto 160. Do you have a 160 thermostat? I would go for a smaller range , because you temps could be all over the place (160->200) if you have a 160 thermostat
Le Mans Master
Joined: Mar 1999
Posts: 9,661
Likes: 1,680
From: Fort Worth Texas
2024 Corvette of the Year Finalist - Unmodified
2023 C8 of the Year Winner - Unmodified
2020 Corvette of the Year Finalist (stock)
2019 C7 of Year Winner (stock)
Former Moderator
Cruise-In I-II-III Veteran
Re: [Paging Craig Marcho] Chip making? (TIMSPEED)
What Dave said.
If you want to send me the chip I'll change just the fan temp for nothing. I guess you are running a 160 stat? I would shoot more along the lines of 180-170 for on off temps.
Email me, cmarcho@hotmail.com and we'll figure out the logistics of getting the chip to me while trying to keep the car running in the meantime! (I might have a spare chip you can use temporarily)
If you want to send me the chip I'll change just the fan temp for nothing. I guess you are running a 160 stat? I would shoot more along the lines of 180-170 for on off temps.
Email me, cmarcho@hotmail.com and we'll figure out the logistics of getting the chip to me while trying to keep the car running in the meantime! (I might have a spare chip you can use temporarily)
