Back-up light switch replace
Thread Starter
Instructor
Joined: Apr 2005
Posts: 120
Likes: 0
From: Port Angeles WA
Back-up light switch replace
The switch to the back-up lights needs to be replaced on my 92 LT1
ZF6. Can someone tell me if there is a ready-made tool that can remove this switch without removing the engine?
Thanks for any help.
ZF6. Can someone tell me if there is a ready-made tool that can remove this switch without removing the engine?
Thanks for any help.
Burning Brakes
Joined: Mar 2008
Posts: 1,073
Likes: 8
From: Houston TX
All you need is a properly sized offset wrench. Hard to describe, but the wrench handle (at both ends) is bent about 90 degrees at the end one way, then the box end is bent 90 degrees the other way creating a protruding box end. You can buy a complete set of these at harbor freight for 10 or 15 bucks.
It's still tight quarters, but with enough time and cussing you will get it!
It's still tight quarters, but with enough time and cussing you will get it!
Burning Brakes
Joined: Mar 2008
Posts: 1,073
Likes: 8
From: Houston TX
