Header question

Reply Subscribe

Thread Tools

Search this Thread

Aug 11, 2010 | 06:25 PM

jackll

Thread Starter

Advanced

Joined: Mar 2010

Posts: 68

Likes: 0

Header question

I am installing long tube headers on a 96. How do you get the cat off the drivers side? There is a bracket bolted to the bell housing and I see no way to get to the top bolt. Thanks for any help.
Jack

Aug 11, 2010 | 06:57 PM

PLRX

Team Owner

Joined: Aug 2005

Posts: 34,988

Likes: 515

From: Riverside County Southern California

Co-winner 2020 C4 of the Year - Modified

2018 Corvette of Year Finalist

2017 C4 of Year

2016 C7 of Year Finalist

St. Jude Donor '09 thru '20

Quote:

Originally Posted by jackll

You got to use an extension with the swivel. It does comes out, I've done it twice. Good luck

Aug 12, 2010 | 09:24 AM

jackll

Thread Starter

Advanced

Joined: Mar 2010

Posts: 68

Likes: 0

Quote:

Originally Posted by PLRX

You got to use an extension with the swivel. It does comes out, I've done it twice. Good luck

Hey thanks for your help. I tried an extension with a wobble end and one with a universal joint, no luck. I am working on a 96 with a 6 speed. There are some tabs on the tunnel right in front of the bolt that are keeping me from getting on the bolt.

Aug 12, 2010 | 09:38 AM

PLRX

Team Owner

Joined: Aug 2005

Posts: 34,988

Likes: 515

From: Riverside County Southern California

Co-winner 2020 C4 of the Year - Modified

2018 Corvette of Year Finalist

2017 C4 of Year

2016 C7 of Year Finalist

St. Jude Donor '09 thru '20

Quote:

Originally Posted by jackll

Hmmm. I have a 96 with a ZF and I had no trouble removing all of them. You have to maneuver and think outside the box. Sometimes a direct approach is not the most preferred method.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump