antenna help please

Reply Subscribe

Thread Tools

Search this Thread

Oct 8, 2010 | 04:16 PM

Bubba91

Thread Starter

Pro

Joined: Dec 2004

Posts: 674

Likes: 1

From: Daytona Beach Florida

antenna help please

I was trying to replace the mast. I have everything removed, but I can't figure out how to get the antenna lead to come off of the unit.

It seems to be hard wired in there with no disconnection point.
Any Help?

Oct 8, 2010 | 05:30 PM

ddahlgren

Melting Slicks

Joined: Dec 2008

Posts: 2,772

Likes: 64

From: Mystic CT

Open the hatch and remove the driverside plastic trim and i think the center one too start with just driver side. It is held on with philp head screws and the ones for the latch for the shade. If yous antenna motor is shot I would love to have it I need a couple pieces of hardware off it.
Dave

Oct 8, 2010 | 06:35 PM

Bubba91

Thread Starter

Pro

Joined: Dec 2004

Posts: 674

Likes: 1

From: Daytona Beach Florida

Quote:

Originally Posted by ddahlgren

Thanks. I was hoping not to have to deal with the hatch area, cause my aftermarket speakers are a pain to deal with. Oh well. It's just the mast I need to change out. I have done everything from lowering the front and back to changing the condenser, but this is kicking my butt.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump