FMS 24# Injectors
Instructor
Joined: Dec 2000
Posts: 124
Likes: 0
From: Huntsville Al
Re: FMS 24# Injectors (SloVette)
Some say you will need a regulator and others don't because of the flow rates. I did not. I have a 91 with L98 engine that came with 22# injectors. I replaced them with FMS(Bosch) 24#'s over a year ago and still no complaints, no afr, no custom eprom. I believe your 92 's LT1 engine came with 24#'s, so the FMS 24's should do fine. It is a direct fit replacement and an easy job. At Summit they are about $215.
Pro
Joined: Nov 1999
Posts: 623
Likes: 0
From: Toronto, ON, Canada
Re: FMS 24# Injectors (SloVette)
I believe the 92 Vettes started using 24 lb/hr injectors as stock ones. So you can just swap the FMS inectors in as a direct replacement. Your PCM (computer) will adjust for the subtle pressure rating difference.
Stock Bosch injectors rated at 43.5 psi while FMS rated at 39 psi.
Stock Bosch injectors rated at 43.5 psi while FMS rated at 39 psi.
Thread Starter
Instructor
Joined: Nov 2001
Posts: 107
Likes: 0
From: Wake Forest NC
Re: FMS 24# Injectors (ezmoney92)
Thanks guys I already bought a set off ebay of $120 they were only used for about a mouth then upgraded to 36#.
So i installed them last night and they work great easy to swap too.
Thanks again
So i installed them last night and they work great easy to swap too.
Thanks again
