need a dyno tuner for a 95 vette
12-21-2010, 11:57 AM
#1
Advanced
Thread Starter
Member Since: Jun 2004
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
need a dyno tuner for a 95 vette
its a 383 with vortech t trim and blowerworks alky kit. i took the car to futral motorsports in 05 and was let down when allen told me the alky kit was a band aid and it would not make any more power with or without it, then he said i needed a bigger cam"wtf" so i loaded my ride up and left. well im back with a new motor and auto tranny 4l80e! im in backwards mississippi and no tuners here that i know of. i need this car tuned right, willing to travel. the car is not hacked up at all, 56,000 miles real clean ride.
12-23-2010, 10:32 AM
#4
Team Owner
I would try going over to http://gafba.com/smf/index.php and ask if Brad Brand from Atlanta Chassis Dyno is still around
A google search turned up http://www.bradbrand.com/
Brad had a 10sec LT1 Vortech 6 speed Z28 in the late 90s.
A google search turned up http://www.bradbrand.com/
Brad had a 10sec LT1 Vortech 6 speed Z28 in the late 90s.
Last edited by 93Polo; 12-23-2010 at 11:59 AM.
12-23-2010, 11:40 AM
#5
Le Mans Master
not sure how close you are to charolette NC but if you are close, you could contact Alvin at pcmforless.com. Alvin has alot of blower experience, espically on f-body's
12-23-2010, 11:58 AM
#6
Team Owner
The f-body world is a good place to look for tuners. LT1s were being discussed over on camaroz28.com but I have not been reading in that area in a long time.
