Brake bleeding
03-05-2011, 08:39 PM
#1
Instructor
Thread Starter
Member Since: Apr 2008
Location: Parkville Missouri
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Brake bleeding
This winter I decided to flush my brake fluid. I started in the rear and used a mighty vac to pull the fluid through till I got clean fluid. And did that at each caliper. I went to drive it for yhe first time this season. The peddle pumped up great. But when I started it the peddle went down much further than normal. I took it around the block and when braking hard the brake light comes on. I'm gonna try bleeding it with a helper working the peddle. Just wondering if there are any special steps to take.
Oh yeah, 92 corvette 6 speed.
Oh yeah, 92 corvette 6 speed.
03-05-2011, 11:11 PM
#2
Advanced
Member Since: Nov 2005
Location: las vegas nevada
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
03-06-2011, 10:55 AM
#3
Drifting
93stroked, does the C4 have a 45mm threaded hydraulic fluid reservoir cap? Also, is brake fluid spilled when the bleeder cap is removed after your job if finished?
