valve covers for rocker arm stud girdles
#1
Advanced
Thread Starter
Member Since: Aug 2010
Location: Kaneohe Hi
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
valve covers for rocker arm stud girdles
Who here is running stud girdles on there top end and with what valve covers? I know some tall covers won't clear the wiper motor but some will. This is for a stroked L98 supperram with afr195 heads. Any one have a set of the comp cam covers? I have my eye in them.
#2
Le Mans Master
Be sure to get a set that will work for the AFR's valve spacing.
http://forums.corvetteforum.com/c4-t...d-girdles.html
http://forums.corvetteforum.com/c4-t...d-girdles.html
#3
Melting Slicks
Member Since: Dec 1999
Location: Austin, TX
Posts: 2,813
Likes: 0
Received 0 Likes
on
0 Posts
I'm running the melrose setup on mine with AFR 210 eliminators. No issues with valve spacing. The valve covers go on to studs that screw in to the girdle itself. I'm actually going to be selling the whole thing pretty soon as I picked up some T&D shaft rockers (just need to install them).
Since you have AFRs, you do have other options though since you can use perimiter bolt covers. I searched around quite a bit but couldn't find anything that would clear the alternator and wiper motor without cutting/welding though.
Since you have AFRs, you do have other options though since you can use perimiter bolt covers. I searched around quite a bit but couldn't find anything that would clear the alternator and wiper motor without cutting/welding though.