idle air connector help
Thread Starter
Instructor
Joined: Feb 2010
Posts: 175
Likes: 0
From: radford virginia
idle air connector help
ok i have a 1993 lt1 and my idle air connector broke apart..the one on the bottom of the throttle body. it has four wires going into the connector. the colosr of the wires are light green with a white stripe, light green with a black stripe, dark green with a black stripe, and dark green with a white stripe. i need a picture of the wires going into the connector because i do not know which wire belongs to which hole. any help is much appreciated thanks.
Slingshot
Joined: Dec 2001
Posts: 3,817
Likes: 24
From: Charlotte NC
Its a good question. I was unsure about mine the last time I changed it so I just plugged it in and it worked.
The green wire either goes on the left or the right as the snap connector will not work in any other direction. So do what I did, plug it in and see if it works. If not, reverse it 180 degrees.
The green wire either goes on the left or the right as the snap connector will not work in any other direction. So do what I did, plug it in and see if it works. If not, reverse it 180 degrees.
