TPI Runner part #?
Thread Starter
Slingshot
Joined: Dec 2001
Posts: 3,817
Likes: 24
From: Charlotte NC
TPI Runner part #?
Are the TPI runners on ALL L98's the same length, diameter and part number? Can anyone tell me the part numbers for the TPI runners for an 86 with aluminum cyl heads?
Le Mans Master
Joined: Dec 2000
Posts: 7,839
Likes: 22
From: San Diego, Ca
Long out of production so even if you had a part # it wouldn't do you any good.
Differences are for the Cold Start Injector and I believe a couple of the F-Body's had smooth surfacing.
Here's the best place I've found for replacements and if you poke around you can find their video and writeup on the differences: www.hotrodlane.cc
Differences are for the Cold Start Injector and I believe a couple of the F-Body's had smooth surfacing.
Here's the best place I've found for replacements and if you poke around you can find their video and writeup on the differences: www.hotrodlane.cc
Instructor
Joined: Apr 2007
Posts: 225
Likes: 1
From: Highland Village texas
Thread Starter
Slingshot
Joined: Dec 2001
Posts: 3,817
Likes: 24
From: Charlotte NC
Long out of production so even if you had a part # it wouldn't do you any good.
Differences are for the Cold Start Injector and I believe a couple of the F-Body's had smooth surfacing.
Here's the best place I've found for replacements and if you poke around you can find their video and writeup on the differences: www.hotrodlane.cc
Differences are for the Cold Start Injector and I believe a couple of the F-Body's had smooth surfacing.
Here's the best place I've found for replacements and if you poke around you can find their video and writeup on the differences: www.hotrodlane.cc
Last edited by pmihaltian; Jun 17, 2011 at 10:26 AM.
