Sensor question
Thread Starter
Instructor
Joined: Feb 2000
Posts: 246
Likes: 2
From: Philadelphia Pa.
Sensor question
Can someone tell me what are the two sensors in the front of the intake manifold? One has like a fuel injector plug on it, and the other has a two wire plug. Thank you, Joe
Safety Car
Joined: Aug 2002
Posts: 3,842
Likes: 230
From: SANTA CRUZ CA
sensors
The following link identifies C4 sensors and locations:
http://www.corvettephotographs.com/c...nformation.htm
http://www.corvettephotographs.com/c...nformation.htm
Safety Car
Joined: Jan 2004
Posts: 3,556
Likes: 13
Brass unit to the left ( with inj plug ) is the cold start switch to operate the cold start injector used on 85 -88 TPI
Race Director
Joined: Apr 2002
Posts: 10,036
Likes: 346
From: Anaheim CA
One is the CTS - Coolant Temperature Sensor. It connects to the ECM.
The other is the cold start switch (the one with the fuel injector looking connector). It turns on the cold start injector while the engine is cranking. It's a thermostatic switch and opens after 8 seconds of cranking or when the coolant is hot.
The other is the cold start switch (the one with the fuel injector looking connector). It turns on the cold start injector while the engine is cranking. It's a thermostatic switch and opens after 8 seconds of cranking or when the coolant is hot.
