D36 batwing: Any changes over the production run?
Thread Starter
Tech Contributor
Joined: Jun 2004
Posts: 20,934
Likes: 962
From: I tend to be leery of any guy who doesn't own a chainsaw or a handgun.
D36 batwing: Any changes over the production run?
Outside of the bolt size on the camber bracket attachment points, were there any other physical/design differences in the D36 batwing over the years?
Thanks.
Thanks.
Safety Car
Joined: Jun 2006
Posts: 3,629
Likes: 28
From: FL
Yes, at some point the bolts changed from English to metric so the hole size changed slightly in the batwing. Seem to recall that using a late cover on an early pumpkin requires opening up the holes slightly.
Advanced
Joined: Apr 2011
Posts: 60
Likes: 0
From: Hamilton NJ
What size are the two bolts for the batwing to chassis bolts supposed to be? In the roller car I got for parts the bolts are not the same and they seem to be too sloppy in the chassis and in the bushing. I know the rear in the roller I bought is from an 86 and the car was a 94. SO someone changed some stuff, could this be because of the year differences?
