Transmission guys I need help quick

Reply Subscribe

Thread Tools

Search this Thread

Jan 20, 2012 | 03:43 PM

vetteset8087

Thread Starter

Instructor

Joined: Jul 2007

Posts: 181

Likes: 0

From: Boise ID

Transmission guys I need help quick

I'm sorry but this is a none Vette question. My Mom has a 96 GMC Jimmy and the 4L60E trans is stuck in reverse. I thought it was in the park safety switch mechanism so I disconnected the rod at the shifter ( Column shift) that wasn't it still stuck. I disconnected the cable from the trans and now the shifter moves free but the lever on the trans is stuck I tried to pry on the lever going into the trans it but it won't budge. Any ideas ...... The trans works and shifts fine it's just stuck.

Last edited by vetteset8087; Jan 20, 2012 at 03:50 PM.

Jan 20, 2012 | 04:34 PM

kh400

Pro

Joined: Feb 2009

Posts: 651

Likes: 33

From: North Port Florida

You need to take the pan off the trans and look where the lever goes into the valve body and see what is keeping the shuttle valve from moving. Good luck.

Jan 21, 2012 | 10:43 PM

don hall

Safety Car

Joined: Aug 2002

Posts: 3,842

Likes: 230

From: SANTA CRUZ CA

Quote:

Originally Posted by kh400

You need to take the pan off the trans and look where the lever goes into the valve body and see what is keeping the shuttle valve from moving. Good luck.

Applying force or rocking the vehicle could cause additional gear damage.

Jan 28, 2012 | 08:59 PM

pricesgarage

Instructor

Joined: Nov 2011

Posts: 183

Likes: 0

did u get the pan off the likage is pretty staright foward u should see the problem once the pans dropped

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump