Beer fridge decal, score !!!! 
think I would rather have had the top gasket
Throttlebody Gasket P/Ns?
Thread Starter
Drifting
Joined: Aug 2009
Posts: 1,972
Likes: 243
Throttlebody Gasket P/Ns?
Long story short, I have an OEM throttlebody ported to 52mm that I want to install. I know, theres a lot of naysayers on a larger TB but this deal was too good to pass up.
The TB is bare, meaning I have to transfer over the top plate and IAC housing from my stocker.
I'm trying to source gaskets locally at the chain stores so I can avoid shipping cost/time.
So far I've found:
Fel-Pro 60655 which is the gasket that mates the TB to the intake - and I'm not even sure that it will accodate a 52mm, but I figured worse case is I trim the holes with an exacto knife.
What I can't seem to pin down is the part numbers for the IAC housing gasket and the top plate. Any ideas?
I did notice that the online retailers carry a BBK set that includes most of what I need but thats a last resort if I can't find it local. The dealer isnt really an option either - the hours I work dont permit me to make it there when the parts counter is open.
The TB is bare, meaning I have to transfer over the top plate and IAC housing from my stocker.
I'm trying to source gaskets locally at the chain stores so I can avoid shipping cost/time.
So far I've found:
Fel-Pro 60655 which is the gasket that mates the TB to the intake - and I'm not even sure that it will accodate a 52mm, but I figured worse case is I trim the holes with an exacto knife.
What I can't seem to pin down is the part numbers for the IAC housing gasket and the top plate. Any ideas?
I did notice that the online retailers carry a BBK set that includes most of what I need but thats a last resort if I can't find it local. The dealer isnt really an option either - the hours I work dont permit me to make it there when the parts counter is open.
Racer
Joined: May 2011
Posts: 293
Likes: 4
I have a old T-body GM gasket kit and it has part number 17110845.
This is a kit purchaced in 88? and and I'm sure it fits all the T-bodys from 85 TPIs thru 96LT1s.
I punched it into GM parts direct alternate catalog and its still listed for $10ish bux plus their shipping, gouging and fondling fees.
This is a kit purchaced in 88? and and I'm sure it fits all the T-bodys from 85 TPIs thru 96LT1s.
I punched it into GM parts direct alternate catalog and its still listed for $10ish bux plus their shipping, gouging and fondling fees.
Last edited by TTOP350; Mar 12, 2012 at 09:42 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
