Which Runners Are Best???
Thread Starter
Burning Brakes
Joined: Oct 2010
Posts: 1,037
Likes: 28
From: Montclair New Jersey
Which Runners Are Best???
I have seen a few companies still offering runners. Which runners are the best to go with?? I am assuming that all of them can be ported? What have other members have used??
thanks...
thanks...
Team Owner
Joined: Oct 2004
Posts: 81,241
Likes: 3,063
From: altered state
St. Jude Donor '05
They are all good
Prefer the SLPs Mid America motor works has them for 329/pr
Plan on spending a few hun more to make them move some air
Then the base, plenum etc.
Bettr off saving for a FIRST system unported it blows them all out of the water for under a grand complete with throttle body.
Prefer the SLPs Mid America motor works has them for 329/pr
Plan on spending a few hun more to make them move some air
Then the base, plenum etc.
Bettr off saving for a FIRST system unported it blows them all out of the water for under a grand complete with throttle body.
Thread Starter
Burning Brakes
Joined: Oct 2010
Posts: 1,037
Likes: 28
From: Montclair New Jersey
Runnerss
They are all good
Prefer the SLPs Mid America motor works has them for 329/pr
Plan on spending a few hun more to make them move some air
Then the base, plenum etc.
Bettr off saving for a FIRST system unported it blows them all out of the water for under a grand complete with throttle body.
Prefer the SLPs Mid America motor works has them for 329/pr
Plan on spending a few hun more to make them move some air
Then the base, plenum etc.
Bettr off saving for a FIRST system unported it blows them all out of the water for under a grand complete with throttle body.
Do you know what gaskets to use if you port the SLP's??
thanks again.
Safety Car
Joined: Apr 2005
Posts: 3,624
Likes: 431
From: Dale City VA
Personally I like the ones that are about 6.5" long attached to a centrally located plenum....
http://www.summitracing.com/parts/EDL-29785/
If your gonna spend $$$ to modify the car at least buy something that'll make it worthwhile....
Will
http://www.summitracing.com/parts/EDL-29785/
If your gonna spend $$$ to modify the car at least buy something that'll make it worthwhile....
Will
Race Director
Joined: Nov 2003
Posts: 12,221
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
I've posted the answer to this very recently. I've also provided the link to the best gasket set for 1.75" ported runners. (more than once). It's a MR. Gasket set as sold my summit.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski