Cylider head identification
Thread Starter
Advanced
Joined: Jun 2012
Posts: 89
Likes: 3
From: Zimmerman MN
Cylider head identification
I'm wondering if there is a way to I.D. cylinder heads without removing them? I have a 94 that was supposedly turned into a 383. Just wondering if there is a way to I.D. the heads without pulling them?
Team Owner
Joined: Oct 2004
Posts: 81,241
Likes: 3,062
From: altered state
St. Jude Donor '05
Pull the valve cover off
There should be a 6?8? digit number on them. Post the last 3 digits of that number it will be stamped in the head around teh valvesprings somewhere probably 374 or 643 something like that.
There should be a 6?8? digit number on them. Post the last 3 digits of that number it will be stamped in the head around teh valvesprings somewhere probably 374 or 643 something like that.
