1989 Auto Trans - Shifter Wiring Harness Schematic Needed
Thread Starter
Racer
Joined: Oct 1999
Posts: 270
Likes: 0
From: Phoenix, AZ, USA
1989 Auto Trans - Shifter Wiring Harness Schematic Needed
I'm installing an aftermarket shifter, and want to wire-up these circuits correctly. Can anyone help me out with either a scan from the shop manual for these connections, or provide a text listing of the wire colors and their interfaces (PWR / GND / starter / reverse lights etc..)? Thanks.
Team Owner
Joined: Sep 2003
Posts: 25,393
Likes: 2,741
Yellow = Start signal FROM key.
Purple = TO starter motor. (May be grn/wht. Not positive).
dk blue = Hot in run or start = Power FOR back-up lights
lt green = TO back up lights
orn/blk = signal TO ECM that shifter is in Park or Neutral (used for Code 24 diagnostics, idle control, and EGR).
blk/wht = Signal Ground = Used for above ECM P/N signal.
Purple = TO starter motor. (May be grn/wht. Not positive).
dk blue = Hot in run or start = Power FOR back-up lights
lt green = TO back up lights
orn/blk = signal TO ECM that shifter is in Park or Neutral (used for Code 24 diagnostics, idle control, and EGR).
blk/wht = Signal Ground = Used for above ECM P/N signal.
Last edited by WVZR-1; Aug 7, 2017 at 06:24 PM.
