Ordered a data logging device
Thread Starter
Instructor
Joined: Aug 2011
Posts: 105
Likes: 0
Ordered a data logging device
So I ordered a datalogging device and this is a whole new realm for me.
This is what I ordered after asking PCMforless:
http://www.moates.net/aldu1-and-cabl1-p-127.html?cPath=97
Honestly I am not sure where to start do I plug it in to the car and computer and just go driving around?
Any help or guidance will be appreciated!
Thanks
This is what I ordered after asking PCMforless:
http://www.moates.net/aldu1-and-cabl1-p-127.html?cPath=97
Honestly I am not sure where to start do I plug it in to the car and computer and just go driving around?
Any help or guidance will be appreciated!
Thanks
Drifting
Joined: Nov 2009
Posts: 1,341
Likes: 2
From: Perth Western Australia
St. Jude Donor '10
So I ordered a datalogging device and this is a whole new realm for me.
This is what I ordered after asking PCMforless:
http://www.moates.net/aldu1-and-cabl....html?cPath=97
Honestly I am not sure where to start do I plug it in to the car and computer and just go driving around?
Any help or guidance will be appreciated!
Thanks
This is what I ordered after asking PCMforless:
http://www.moates.net/aldu1-and-cabl....html?cPath=97
Honestly I am not sure where to start do I plug it in to the car and computer and just go driving around?
Any help or guidance will be appreciated!
Thanks
http://tunerpro-rt.sharewarejunction.com/
What vehicle?
Thread Starter
Instructor
Joined: Aug 2011
Posts: 105
Likes: 0
I was looking into ttsdatamaster because that's what PCMforless is telling me to use if I want them to burn chips for me.
How well does datamaster work?
It is a 1990 corvette
Only reason it needs a tune is because it's a 383 with a cam
How well does datamaster work?
It is a 1990 corvette
Only reason it needs a tune is because it's a 383 with a cam
Pro
Joined: Aug 2010
Posts: 617
Likes: 17
From: Hamilton Ontario
I use datamaster to do my datalogs...excellent realtime graphics
I use Tunerpro to view and make changes to my bin file for the chip...you can also burn your new chip from within Tunerpro.
Lots of great reading here on chip burning...datalogging...etc..
Datalog Help
Have fun!
Drifting
Joined: Nov 2009
Posts: 1,341
Likes: 2
From: Perth Western Australia
St. Jude Donor '10
For datalogging you will need to plug the aldl cable into the socket under the steering wheel (to the right) and the usb cable into a laptop. You will then need to run the datalogging software from the laptop and estalish comms (connect) with the ecm.
When you come to swapping chips you will have to retrieve the ecm from under the passenger side dash.
When you come to swapping chips you will have to retrieve the ecm from under the passenger side dash.
Intermediate
Joined: Mar 2012
Posts: 44
Likes: 0
So I ordered a datalogging device and this is a whole new realm for me.
This is what I ordered after asking PCMforless:
http://www.moates.net/aldu1-and-cabl....html?cPath=97
Honestly I am not sure where to start do I plug it in to the car and computer and just go driving around?
Any help or guidance will be appreciated!
Thanks
This is what I ordered after asking PCMforless:
http://www.moates.net/aldu1-and-cabl....html?cPath=97
Honestly I am not sure where to start do I plug it in to the car and computer and just go driving around?
Any help or guidance will be appreciated!
Thanks
Do a bit of forum reading on the tunerpro, gearheadefi, thirdgen, and delcohacking sites for some good info. I believe its the Tunerpro site that has a step by step getting started guide as a sticky. (I could be wrong...might be gearheadefi.
