94 paper clip code reader
Thread Starter
Team Owner
Joined: Feb 2003
Posts: 54,107
Likes: 9,424
From: Sitting in his Nowhere land Hanover Pa
2024 C2 of the Year Finalist - Unmodified
2015 C2 of Year Finalist
94 paper clip code reader
I did the paper clip code reader on my 94 tonight to try and bring up why the check engine light came on after a new opti change. it only comes on for the first 2 mins after cold start up. then goes off it did this the last 2 days. so after getting into the menu I only got a code C12. after research that only means the engine is not running. is that right?
after I removed the paper clip I started the car and light never came on. did I clear the code by chance?
after I removed the paper clip I started the car and light never came on. did I clear the code by chance?
Le Mans Master
Joined: Jun 2009
Posts: 6,528
Likes: 752
From: South Dakota
Try taking a look at the following link.
http://tech.corvettecentral.com/2011...trouble-codes/
It explains how to check codes, what they mean (make sure you look at the right section for your model year), and how to clear them.
A code showing as “C12” for the CCM module (module #1) means no codes are stored. So C12 is a good thing to see.
At the end of the referenced link, it explains how to clear the codes. Perhaps you did this while working with the codes?
http://tech.corvettecentral.com/2011...trouble-codes/
It explains how to check codes, what they mean (make sure you look at the right section for your model year), and how to clear them.
A code showing as “C12” for the CCM module (module #1) means no codes are stored. So C12 is a good thing to see.
At the end of the referenced link, it explains how to clear the codes. Perhaps you did this while working with the codes?
Race Director
Joined: Apr 2002
Posts: 10,036
Likes: 346
From: Anaheim CA
Error code 12 is "no reference pulses from distributor". You get this when the engine is not running. It is used as a delimiter for the other codes.
The reason for this (and other code numbers -- why is code 32 used for two different things?) is another mystery lost in the mists of time...
The reason for this (and other code numbers -- why is code 32 used for two different things?) is another mystery lost in the mists of time...
