[NEEDED] 4.10 VIPER GEAR
Melting Slicks
Joined: Jun 2000
Posts: 3,215
Likes: 6
From: Tampa Florida
Re: [NEEDED] 4.10 VIPER GEAR (GS345)
I don't have it handy, but your local Dodge dealer does. It will be in their MOPAR Performance catalog for Vipers. They car 3.55, 3.73 and a 4.10 last time I checked. Price is ~$425 retail.
I think http://www.viperconnection.com still sells it too.
I think http://www.viperconnection.com still sells it too.
Thread Starter
Drifting
Joined: Nov 2000
Posts: 1,276
Likes: 0
From: Ft. Worth Texas
St. Jude Donor '11
Re: [NEEDED] 4.10 VIPER GEAR (No Go)
Im guessing that the DANA44 in our vettes '96' is the same as the '96' viper as far as the ring and pinion goes......right? :confused:
Melting Slicks
Joined: May 2002
Posts: 3,424
Likes: 1
From: Tucson Az
St. Jude Contributor
Re: [NEEDED] 4.10 VIPER GEAR (No Go)
Hey Jeff, if you have no luck getting the part number, I have it at home, just rebuilt my Dana 44 with a Dana gear set, 4.10. It took me days to come up with the part number. A buddy had a set so I wrote down the individual part numbers (they're stamped on the gears). Problem is you can't order the set without the "set" number @#?&^ -ing . . . . . . So I ended up calling Dana corp, going thru the gauntlet to get to the correct dept, etc, etc, finally got the "SET" part number, from there, no problem ! ! ! ! ! Oh, my price was $275
You can e-mail me at cecenaad@flash.net
Be glad to help.
Eddie in Tucson '92 LT1, many mods, some legal '84 soon to paint non-streetable race car :cool: :cheers: :flag
[Modified by edsalinas, 10:01 PM 6/26/2002]
You can e-mail me at cecenaad@flash.net
Be glad to help.
Eddie in Tucson '92 LT1, many mods, some legal '84 soon to paint non-streetable race car :cool: :cheers: :flag
[Modified by edsalinas, 10:01 PM 6/26/2002]
