1988 Evap canister
Thread Starter
Racer
Joined: Jul 2013
Posts: 275
Likes: 1
From: Colorado Springs
1988 Evap canister
I have found a few vacuum leaks and in searching for more I found what I think is a vent for the charcoal (evap) system by the drivers side headlight. I have one line coming out of the bottom of the canister then it tee's off into another line and both lines end and are left wide open about 8"-12" away from the canister. Is this normal?
Safety Car
Joined: Aug 2002
Posts: 3,842
Likes: 230
From: SANTA CRUZ CA
Thread Starter
Racer
Joined: Jul 2013
Posts: 275
Likes: 1
From: Colorado Springs
Not really, I will take a picture and see if some one with the same year can tell me where their lines go. I do not see anything that they would plug into, but why would they have a tee if they both just deadend?
Race Director
Joined: Apr 2002
Posts: 10,036
Likes: 346
From: Anaheim CA
A while back we got into a discussion about charcoal canister connections (I don't remember how it all got started -- I think it had something to do with gas tank pressure). As a result I posted this (lots of pictures):
http://forums.corvetteforum.com/1581490349-post25.html
http://forums.corvetteforum.com/1581490349-post25.html
Instructor
Joined: Dec 2004
Posts: 217
Likes: 1
From: Drums PA
I have found a few vacuum leaks and in searching for more I found what I think is a vent for the charcoal (evap) system by the drivers side headlight. I have one line coming out of the bottom of the canister then it tee's off into another line and both lines end and are left wide open about 8"-12" away from the canister. Is this normal?
