Injector question
Thread Starter
Cruising
Joined: May 2012
Posts: 10
Likes: 0
From: Ft. Hood TX
Injector question
Hello,
I bought a '92 Corvette for a Father/Son project. The car has a bad cam, so we are replacing it with a ZZ4 cam, as well as new lifters, springs, rocker arms, and push rods. I have a custom chip to be programmed as well. Everything else is stock for now. What injector do you recommend for it? Any Ford type that you would suggest? I've been reading a little about the Bosch III, with mixed reviews. Read something else about '92 using a 22# injector.
Any suggestions are greatly appreciated...
I bought a '92 Corvette for a Father/Son project. The car has a bad cam, so we are replacing it with a ZZ4 cam, as well as new lifters, springs, rocker arms, and push rods. I have a custom chip to be programmed as well. Everything else is stock for now. What injector do you recommend for it? Any Ford type that you would suggest? I've been reading a little about the Bosch III, with mixed reviews. Read something else about '92 using a 22# injector.
Any suggestions are greatly appreciated...
Team Owner
Joined: Jul 2004
Posts: 28,422
Likes: 3,275
From: Hartford WI
http://fuelinjectorconnection.com/sh...?productid=420
Who is doing the custom chip? Dyno tune or just off specs or is it done by data logging?
Who is doing the custom chip? Dyno tune or just off specs or is it done by data logging?
Thread Starter
Cruising
Joined: May 2012
Posts: 10
Likes: 0
From: Ft. Hood TX
Aklim,
Thanks for the link. Thats exactly what I was looking for. As for the chip, I bought it from a member on CAC. He has an order form to fill out, and then he sends the chip back burned to my specs. I'm not sure if I will use him or find someone else. Looks like he got banned from CAC for advertising and never proving his claims.
Thanks for the link. Thats exactly what I was looking for. As for the chip, I bought it from a member on CAC. He has an order form to fill out, and then he sends the chip back burned to my specs. I'm not sure if I will use him or find someone else. Looks like he got banned from CAC for advertising and never proving his claims.
Drifting
Joined: May 2013
Posts: 1,736
Likes: 31
From: Reno Nevada
http://fuelinjectorconnection.com/sh...?productid=420
Who is doing the custom chip? Dyno tune or just off specs or is it done by data logging?
Who is doing the custom chip? Dyno tune or just off specs or is it done by data logging?
Team Owner
Joined: Jul 2004
Posts: 28,422
Likes: 3,275
From: Hartford WI
Aklim,
Thanks for the link. Thats exactly what I was looking for. As for the chip, I bought it from a member on CAC. He has an order form to fill out, and then he sends the chip back burned to my specs. I'm not sure if I will use him or find someone else. Looks like he got banned from CAC for advertising and never proving his claims.
Thanks for the link. Thats exactly what I was looking for. As for the chip, I bought it from a member on CAC. He has an order form to fill out, and then he sends the chip back burned to my specs. I'm not sure if I will use him or find someone else. Looks like he got banned from CAC for advertising and never proving his claims.
Thread Starter
Cruising
Joined: May 2012
Posts: 10
Likes: 0
From: Ft. Hood TX
Yeah I agree with you on the dyno tuning. I had it done to my Saleen with an SCT tuner, and it was like night and day difference.
Since this is my first Vette, what tuner or chip is everyone using for these C4's? Obviously its not a hand held tuner. I know most shops are tuning only for SCT or Diablo.
Since this is my first Vette, what tuner or chip is everyone using for these C4's? Obviously its not a hand held tuner. I know most shops are tuning only for SCT or Diablo.
Team Owner
Joined: Jul 2004
Posts: 28,422
Likes: 3,275
From: Hartford WI
Yeah I agree with you on the dyno tuning. I had it done to my Saleen with an SCT tuner, and it was like night and day difference.
Since this is my first Vette, what tuner or chip is everyone using for these C4's? Obviously its not a hand held tuner. I know most shops are tuning only for SCT or Diablo.
Since this is my first Vette, what tuner or chip is everyone using for these C4's? Obviously its not a hand held tuner. I know most shops are tuning only for SCT or Diablo.
I don't know what everyone is using but I had it brought to Elk River MN and they did strap in on and tweaked the program. Previously when Lingenfelter was alive, I did bring it to him and he had also run it that way and on the street to get drivability down pat. Obviously, they did a base program first since it was different than stock but they had to keep revising it till it was dialed in just right.
You should fill up your location so we can guide you better.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Team Owner
Joined: Jul 2004
Posts: 28,422
Likes: 3,275
From: Hartford WI
Safety Car
Joined: Sep 2001
Posts: 4,154
Likes: 553
From: Glenbeulah Wi
Hello,
I bought a '92 Corvette for a Father/Son project. The car has a bad cam, so we are replacing it with a ZZ4 cam, as well as new lifters, springs, rocker arms, and push rods. I have a custom chip to be programmed as well. Everything else is stock for now. What injector do you recommend for it? Any Ford type that you would suggest? I've been reading a little about the Bosch III, with mixed reviews. Read something else about '92 using a 22# injector.
Any suggestions are greatly appreciated...
I bought a '92 Corvette for a Father/Son project. The car has a bad cam, so we are replacing it with a ZZ4 cam, as well as new lifters, springs, rocker arms, and push rods. I have a custom chip to be programmed as well. Everything else is stock for now. What injector do you recommend for it? Any Ford type that you would suggest? I've been reading a little about the Bosch III, with mixed reviews. Read something else about '92 using a 22# injector.
Any suggestions are greatly appreciated...