Can tuning using Moates and software correct...
Thread Starter
Burning Brakes
Joined: Apr 2009
Posts: 1,185
Likes: 33
From: Charlotte Michigan
Can tuning using Moates and software correct...
Can tuning using Moates and software correct...
1. Anolog Gauges that read inaccurately like fuel, and cooling both water and oil?
2. Lower numbers that are to high for fuel economy avg?
3. Outside temp reading?
1. Anolog Gauges that read inaccurately like fuel, and cooling both water and oil?
2. Lower numbers that are to high for fuel economy avg?
3. Outside temp reading?
Safety Car
Joined: Sep 2001
Posts: 4,157
Likes: 554
From: Glenbeulah Wi
Thread Starter
Burning Brakes
Joined: Apr 2009
Posts: 1,185
Likes: 33
From: Charlotte Michigan
Is there a way to adjust the outside temp readout? I replaced the outside temp pickup sensor a few years ago, but it made no difference on the readout. When it is 70 outside the readout is around 114 degree's. I have gotten use to just subtracting 44 from whatever the readout is. Just annoying at times.
Drifting
Joined: May 2013
Posts: 1,736
Likes: 31
From: Reno Nevada
There's a table in the constants in the MAF cars named Display Injector Flow Rate that is set to 3.81. If you change injectors and flowrate you simply divide by 5.85 and reset this table to correct its display reading. IE: if you swapped to 30 lb injectors you would take 30 / 5.85 = 5.13 and the gauge will now read correctly.
