Drivers window
Thread Starter
Racer
Joined: Oct 2013
Posts: 483
Likes: 19
From: las vegas nv
Drivers window
I have 2 issues, one is the drivers window only rolls up jag way, motors still turns and I can manually pull it up but slides back down to half way point, motor? Or off track?, and same door lock button works for alarms but does not lock the door and the key from out side just disengages the alarm, bad tumbler for sure but what about the lock button?
Drifting
Joined: Mar 2013
Posts: 1,952
Likes: 239
From: Venice Cali.
I have 2 issues, one is the drivers window only rolls up jag way, motors still turns and I can manually pull it up but slides back down to half way point, motor? Or off track?, and same door lock button works for alarms but does not lock the door and the key from out side just disengages the alarm, bad tumbler for sure but what about the lock button?
Remove the aluminum panel
Reconnect the rod to the tumbler
And since the door regulator is probably bad or broken you
will need to replace..
I used the newer scissor type and the writup which I found here works great
Racer
Joined: May 2012
Posts: 269
Likes: 0
Safety Car
Joined: Nov 2008
Posts: 4,328
Likes: 15
From: Jacksonville FL
Yes no adjustment necessary. Like so many of the motors on our Vettes, they sense the torque when the stop is hit and turn off. The only way to "adjust" the motors is to move the stops.
Yes. you can replace the ribbon and solve your up and down issues. You would be much better off upgrading to the scissor style. I have replaced both on my '85 and they work so much better, faster and more positive. If its in the budget, go for it!
Yes. you can replace the ribbon and solve your up and down issues. You would be much better off upgrading to the scissor style. I have replaced both on my '85 and they work so much better, faster and more positive. If its in the budget, go for it!
