1996 antenna motor replace

Reply Subscribe

Thread Tools

Search this Thread

Apr 12, 2015 | 02:18 AM

joebuckSR

Thread Starter

Instructor

Joined: Feb 2009

Posts: 155

Likes: 1

From: Morgan city la

1996 antenna motor replace

having trouble removing Antenna wire from motor are does it come loose at the motor are where does the wire disconnect.

Apr 12, 2015 | 07:37 AM

antfarmer2

Race Director

Joined: Mar 2015

Posts: 15,926

Likes: 579

Quote:

Originally Posted by joebuckSR

having trouble removing Antenna wire from motor are does it come loose at the motor are where does the wire disconnect.

If I remember right the connection was under the left side of the back hatch trim tied a wire to it to pull it through I think most would just cut the wires

Apr 12, 2015 | 08:42 AM

LannyL81

Melting Slicks

Joined: Nov 2005

Posts: 3,323

Likes: 142

From: Green Valley Arizona

Both the electrical and antenna connections are under the large rear hatch trim panel. Access requires that both side trim pieces are removed first or at least loose in order to remove the large rear panel.

I removed the left tail lights so I could put my hand/arm into area to be able to pull the rubber grommet out and push the new one back in. Of course this requires license plate removal and removal of both left tail light housing as I could not reach the outer housing without removing the inner left housing.

Takes an hour or so to complete this task.

Good luck.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump