bassackwards

Hey guys, my driver's window goes way too high and I believe the driver's front window stop is broken. I'm having trouble finding a new one. Anybody know who sells them?

WVZR-1

In '93 door/window changed - do you want the stop that's bolted to the door frame or maybe the guide that's attached to the glass?

Check #62 in this image. If you're asking someone for a "stop" they're looking at #41 which is NLA. The LH guide should be available still.

http://parts.nalleygmc.com/showAssem...=0&modelYear=0

bassackwards

Does #62 stop upward movement of the glass?

higgyburners

10243037 and 10243038 are the guides (left and right door) and are what will bump up against 10263155 common part (left to right door)
The stop will more than likely not be broken as it is a metal angle with a felt pad on it, you will want to make sure the pad is not missing, it bumps up against the plastic guides that you will find broken.

Guides
http://www.ebay.com/itm/1993-1996-C4-Corvette-Front-Door-Window-Guide-Right-GM-10243038-/161672872555?hash=item25a474426b&vxp=mtr

bassackwards

To update this thread I'll post that the window guide replacement as posted above did fix the over travel problem. The bolt holding it on the glass was Loctited on and was very difficult to break loose.

antfarmer2

Please post as many pics and info as you can need to play with my 94. I let a freind drive it and he used the window to pull himself out.

bassackwards

Already finished with no pics. Sorry.

Opihi59

If we're talking about the same part, here you go.








I'm not sure if this is helpful at all, but this is the only photo I took of the door when I was doing this repair about 12 yrs ago or so I think. This was the passenger door, so the driver's side door part number will not be the same...will end in 7 rather than 8 as the PN in the photo above shows, just like higgyburners posted above.

Patrick Shea

Thanks for the info and pictures. I have the same issue with my '93.