$2.00 clutch fix
Thread Starter
Instructor
Joined: Sep 2006
Posts: 185
Likes: 2
From: Easton PA
The master cylinder pin on my 84 Vette clutch pedal was worn so bad it was not allowing the full throw of my slave the first inch of clutch movement would not press the master cylinder. Today I pulled the pedal out and replaced the pin with a few parts from Lowes total was $2.00 and about two hours time.
Parts used
Here is the worn pin
New pin installed. I cut it to size and tack welded it
Parts used
Here is the worn pin
New pin installed. I cut it to size and tack welded it
Last edited by ray1979; Jun 4, 2015 at 07:49 PM.
