Is this the Opti? '94
Thread Starter
Pro
Joined: Oct 2012
Posts: 672
Likes: 2
From: Cheltenham, England
Is this the Opti? '94
After a particularly hard drive on a nice straight road I noticed I had lost a cylinder,I am hoping it is just a plug or wire and not the Opti starting to crap out, its a 94 and does have 71K on it so Im sure some will say its due to go but its fine on the other cylinders, (its on the lefthand bank) no smoke of any colour, it wasnt missing at all up to this point either,so far as I know the plugs and wires could be originals! certainly haven't been changed in the three years I've had the car, any ideas?
Last edited by ricasso; Aug 14, 2015 at 01:31 AM.
Melting Slicks
Joined: Jul 2011
Posts: 2,605
Likes: 202
From: Trinity FL
If you have for sure narrowed it down to one cylinder not firing, then it is probably just a plug or wire issue. It could be the terminal for that cylinder within the Opti cap but kind of doubtful. You need to narrow it down to which cylinder exactly and then replace that plug and wire.
Thread Starter
Pro
Joined: Oct 2012
Posts: 672
Likes: 2
From: Cheltenham, England
If you have for sure narrowed it down to one cylinder not firing, then it is probably just a plug or wire issue. It could be the terminal for that cylinder within the Opti cap but kind of doubtful. You need to narrow it down to which cylinder exactly and then replace that plug and wire.
I have a new set of wires that I bought some time ago and a set of plugs on order, hard to find the right plugs here in the UK for some reason, so it seems a good opportunity to freshen it up a bit.
Race Director
Joined: Mar 2015
Posts: 15,926
Likes: 579
On my 94 I had to loosen the power steering pump and move it forward to get the wires through make sure you use a bit of dielectric gease on them and make sure they click twice. I had one cylinder stop fireing pulled the plastic cover off and found a injector wire nibbled through. Don't forget the antisize on the plugs.
Thread Starter
Pro
Joined: Oct 2012
Posts: 672
Likes: 2
From: Cheltenham, England
On my 94 I had to loosen the power steering pump and move it forward to get the wires through make sure you use a bit of dielectric gease on them and make sure they click twice. I had one cylinder stop fireing pulled the plastic cover off and found a injector wire nibbled through. Don't forget the antisize on the plugs.
Le Mans Master
Joined: Jul 2009
Posts: 6,381
Likes: 66
From: SF bay area C.A.
C4 of the Year Finalist
On my 94 I had to loosen the power steering pump and move it forward to get the wires through make sure you use a bit of dielectric gease on them and make sure they click twice. I had one cylinder stop fireing pulled the plastic cover off and found a injector wire nibbled through. Don't forget the antisize on the plugs.
I think you need a nickname how about "Always Click Twice"
