I'm regreasing all the poly bushings in the rear end and noticed that the rear lower trailing arms (Fiberglass type) have have an asymmetrical shape, does anyone have a picture of this type trailing arm and how they are oriented on the car. Just want to make sure I'm putting them on the right way.

The threaded boss on the middle section goes to the front of the car on both sides. This is the attachment point for the Real Time Damping control arm to attach for the adjustable ride control on the 96. It also faces to the center of the car when installed.


Cheers, Mark

Here is a pic of it installed:
This is on the left rear of my 96

That's just what I needed to see, Thanks for the quick response!