Engine Builder
Thread Starter
Burning Brakes
Joined: Mar 2012
Posts: 769
Likes: 22
From: California
FL Events Coordinator
St. Jude Donor'13
Engine Builder
Anyone in san francisco or sacramento area know of a good engine builder that wont kill me in price? Im have a little bit of oil spitting out of the dip stick, oil filler cap, and some other places causing a decent amount of smoke. It only happens if driving it hard. Mainly WOT and then stopping at a light is the only time I notice it. I have lost no more than .25 of a quart over the normal 3k mile oil change interval.
Replaced PCV valve a while ago and it didnt help and checked the hose and it seemed clear.
Not sure where to go from here as what to do. I wish it was something simple/stupid, but not sure it is.
Please let me know your thoughts along with recommendations for engine builders in case I need one.
Replaced PCV valve a while ago and it didnt help and checked the hose and it seemed clear.
Not sure where to go from here as what to do. I wish it was something simple/stupid, but not sure it is.
Please let me know your thoughts along with recommendations for engine builders in case I need one.
Thread Starter
Burning Brakes
Joined: Mar 2012
Posts: 769
Likes: 22
From: California
FL Events Coordinator
St. Jude Donor'13
Gonna do a good tuneup including a newer PCV valve incase mine is a failure along with a new grommet since mine is starting to look rough. Any idea on the dimensions for it? Seems to be multiple on rock auto.
